This leg press calculator estimates your one-rep max from the weight and reps of any hard set. Add the sled weight if you know it, and the calculator also shows how much you really push on an angled machine. Example: 360 lb for 10 reps is about a 472 lb leg press max.
Enter a set to estimate your leg press max.
Example · type your own numbers
How the leg press calculator works
The estimate uses the same seven 1RM formulas as our one rep max calculator and averages them. The formulas were developed mainly on free-weight lifts, so treat a leg press estimate as a close guide. It is most reliable when the set is hard: stop no more than a rep short of failure. The table under the leg press calculator result gives weights for other rep counts.

Leg press calculator example
Say you pressed 360 lb of plates for 10 reps on a 45° sled. The leg press calculator puts your max at about 472 lb, plates only. Along the rails you pushed about 255 lb on each rep.

Leg press weight calculator: what you are really pushing
On an angled sled, gravity pulls the load straight down, but you push it along the rails. Only part of the weight acts along the rails: the load times the sine of the sled angle. It is the same physics as any inclined plane.
| Sled angle | Share of load along the rails | Pushed along the rails, 500 lb load |
|---|---|---|
| 30° | 50% | 250 lb |
| 45° | 71% | 354 lb |
| 60° | 87% | 433 lb |
This ignores friction in the rails, which makes the sled a little harder to push up and easier to lower. It is also why leg press numbers look large next to a squat.
Leg press calculator chart: 1RM by weight and reps
Find the weight you used on the left and read across to your reps. Values are estimated 1RMs in pounds, including whatever you counted in the weight.
| Weight (lb) | 3 reps | 5 reps | 6 reps | 8 reps | 10 reps | 12 reps |
|---|---|---|---|---|---|---|
| 180 | 197 | 208 | 213 | 224 | 236 | 248 |
| 270 | 295 | 312 | 320 | 337 | 354 | 372 |
| 360 | 394 | 416 | 427 | 449 | 472 | 496 |
| 450 | 492 | 520 | 533 | 561 | 590 | 619 |
| 540 | 590 | 624 | 640 | 673 | 708 | 743 |
| 630 | 689 | 728 | 747 | 786 | 826 | 867 |
| 720 | 787 | 832 | 854 | 898 | 944 | 991 |
Each cell is the average of seven formulas, rounded to the nearest lb. Read across from the weight you lifted to the reps you got.

Leg press to squat
Many people search for a leg press to squat calculator. We have not added one to this leg press calculator, because there is no reliable ratio to base it on. The two lifts load the legs differently, machines vary widely, and the gap between them changes from person to person. If you want a squat number, estimate it from a squat set with the squat max calculator.
Frequently asked questions
Should I count the sled weight?
Count it if you want a number you can compare across machines, because sleds weigh very different amounts. Leave it out if you only ever use one machine and want a number that matches the plates. Either way, be consistent: the leg press calculator works with or without the sled weight. The sled weight is often printed on the machine; if not, ask the gym.
Is there a leg press to squat calculator?
Not one we can stand behind. There is no published, validated ratio between leg press and squat 1RMs. Machines differ in sled weight, angle and friction, and the leg press takes balance and the lower back out of the lift, so people with the same squat can have very different leg press numbers. Use the squat max calculator with a real squat set instead.
Why is my leg press so much higher than my squat?
You are not lifting your own bodyweight, there is no balance demand, the range of motion is often shorter, and on a 45° sled you push only about 71% of the load along the rails. A leg press far above your squat is normal and does not mean either number is wrong.
How many reps should I use to estimate my leg press max?
For the leg press max calculator, use a hard set of 3–10 reps. Leg press sets are often done for high reps, and estimates from more than 10 reps are rougher because the formulas disagree more.
Is a 1RM leg press test safe?
Most people never need one. Very heavy singles on a sled can push the lower back into flexion at the bottom. Estimating from a set of 5–10 gives a number good enough for programming.
Related calculators and guides