Use this RPE calculator to turn any set into an estimated max and working weights. On the RPE chart below, 5 reps at RPE 8 is about 82.3% of your 1RM and 3 reps at RPE 9 is about 89.0%. Enter a set and its RPE to get started.
Enter a set and its RPE to see your estimated max.
Example · type your own numbers
Weights for your next sets
RPE chart: percentage of 1RM by reps and RPE
Find your reps on the left and your RPE across the top. The number is the weight as a percentage of your one-rep max.
| Reps | RPE 10 | RPE 9.5 | RPE 9 | RPE 8.5 | RPE 8 | RPE 7.5 | RPE 7 | RPE 6.5 | RPE 6 |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 100.0% | 97.2% | 94.3% | 92.9% | 91.5% | 90.3% | 89.0% | 87.8% | 86.6% |
| 2 | 94.3% | 92.9% | 91.5% | 90.3% | 89.0% | 87.8% | 86.6% | 85.5% | 84.4% |
| 3 | 91.5% | 90.3% | 89.0% | 87.8% | 86.6% | 85.5% | 84.4% | 83.3% | 82.3% |
| 4 | 89.0% | 87.8% | 86.6% | 85.5% | 84.4% | 83.3% | 82.3% | 81.2% | 80.2% |
| 5 | 86.6% | 85.5% | 84.4% | 83.3% | 82.3% | 81.2% | 80.2% | 79.2% | 78.3% |
| 6 | 84.4% | 83.3% | 82.3% | 81.2% | 80.2% | 79.2% | 78.3% | 77.3% | 76.4% |
| 7 | 82.3% | 81.2% | 80.2% | 79.2% | 78.3% | 77.3% | 76.4% | 75.5% | 74.6% |
| 8 | 80.2% | 79.2% | 78.3% | 77.3% | 76.4% | 75.5% | 74.6% | 73.7% | 72.8% |
| 9 | 78.3% | 77.3% | 76.4% | 75.5% | 74.6% | 73.7% | 72.8% | 71.9% | 71.1% |
| 10 | 76.4% | 75.5% | 74.6% | 73.7% | 72.8% | 71.9% | 71.1% | 70.3% | 69.4% |
| 11 | 74.6% | 73.7% | 72.8% | 71.9% | 71.1% | 70.3% | 69.4% | 68.6% | 67.8% |
| 12 | 72.8% | 71.9% | 71.1% | 70.3% | 69.4% | 68.6% | 67.8% | 67.1% | 66.3% |
Example: your max is 300 lb and the program says 3 reps at RPE 8. The chart says 86.6%, so load about 260 lb.
What RPE means
RPE stands for rating of perceived exertion. In lifting it is scored by reps in reserve: how many more reps you could have done with good form when you racked the bar.
| RPE | Reps left in the tank | What it feels like |
|---|---|---|
| 10 | 0 | Maximal. No more reps, no more weight. |
| 9.5 | 0, but a little more weight was possible | No more reps, but you could have added a little weight. |
| 9 | 1 | One more rep, definitely. |
| 8.5 | 1, maybe 2 | One more for sure, maybe two. |
| 8 | 2 | Two more reps. |
| 7 | 3 | Fast, solid reps. Three more. |
| 6 | 4 | Moderate effort. Four or more left. |
This reps-in-reserve scale was tested in a 2016 study of 29 lifters (Zourdos et al., 2016). It found a strong link between RPE and bar speed, and experienced lifters' ratings tracked bar speed more closely than novices'.
RPE calculator example
Say your top set was 225 lb for 5 reps at RPE 8. The RPE calculator treats that as 7 reps to failure, which puts your 1RM at about 274 lb. It then suggests about 245 lb for a triple at RPE 9.

How the RPE chart is calculated
A set at RPE 8 is treated as two reps short of failure. So 5 reps at RPE 8 counts as 7 reps to failure, and the weight is whatever percentage of a 1RM you could lift for 7 reps. That percentage comes from the average of the seven formulas in our one rep max calculator (Epley, Brzycki, Lombardi, Lander, O'Conner, Mayhew and Wathen). Half steps such as RPE 8.5 sit halfway between the whole numbers.
Because every tool on this site uses the same engine, a 1RM from the RPE calculator matches the rep max chart and the training max calculator.

How to use the RPE calculator in training
- Pick weights for the day. If the program says 5 reps at RPE 8, look up the percentage, work up to that weight, and adjust: if it feels like RPE 7, add a little; if it feels like 9, take some off.
- Track your max without testing. Your best set each week at RPE 8–9 gives a fresh estimated 1RM. In the example above, 225 lb × 5 at RPE 8 works out to about 274 lb.
- Use your hardest sets. RPE ratings are most reliable close to failure, so estimate your max from sets at RPE 8–10 rather than easy warm-up sets.
Frequently asked questions
What does RPE 8 mean?
RPE 8 means you finished the set with about two reps left in the tank. RPE 9 is one rep left, RPE 10 is nothing left, and a half point such as 8.5 means "maybe one more, definitely two".
What percentage of my 1RM is RPE 8 for 5 reps?
About 82.3% on this chart. Five reps with two in reserve is treated as seven reps to failure, and seven reps to failure is about 82.3% of a 1RM using the average of seven 1RM formulas.
How accurate is an RPE chart?
It is a starting point. Rating reps in reserve gets more accurate with practice and on sets close to failure. People who can do many reps at a given percentage will find the chart a little light, and people who grind out few reps will find it a little heavy.
Is this the same as the Tuchscherer RPE chart?
No. Mike Tuchscherer popularised RPE in powerlifting, and many charts copy his table. Ours is calculated from the same seven 1RM formulas the rest of this site uses, so the RPE calculator, the 1RM calculator and the percentage charts all agree with each other.
Can I use RPE below 6?
The chart stops at RPE 6 (four reps in reserve). Further from failure, reps-in-reserve ratings get less reliable, so an estimate would not mean much.
Sources
- Zourdos, M. C., et al. (2016). Novel resistance training-specific rating of perceived exertion scale measuring repetitions in reserve. Journal of Strength and Conditioning Research, 30(1), 267–275. doi:10.1519/JSC.0000000000001049
- Percentages: average of seven 1RM formulas. See the 1RM formulas compared.
Related calculators and guides